How to Install a Bow Release

Overview
The bow release aid is the link between the archer and the bow. It is the most important piece for accurate and safe shooting as it holds the string at full draw and releases the arrow smoothly. Release aids provide more consistent releases and arrow flight. Many bow release aids can be tricky to install but they all function under similar operating procedures.
Step 1
Place the bow release aid on your wrist or palm. Activate the trigger to move the calipers (the "teeth" that attach to the bow string) to the open position. Most releases will stay in this position until closed.
Step 2
Move the release to the bow string and attach to the predetermined spot. This will either be under the arrow nocking point, if the bow is set up for the release to attach to the bow string, or on the loop if installed.
Step 3
Clip the calipers on the string or loop by reversing the position of the trigger to the loaded position. At this point, the bow release is fully installed and attached to the bow string and the bow is ready to be drawn.
Skill
Easy
Things You'll Need
Bow
Bow release
Tips
Practice using and installing the bow release at the archery range.
Warnings
Make sure both calipers are secured around the bow string before you draw the bow.